TT31 – TRANSPONDER - CLASS LEADER

Trig’s TT31 transponder is the ideal retro-fit for the popular KT76A, KT76C and KT78A transponders. The TT31 is a Class 1 transponder which will ‘plug and play’ straight into an existing KT76A, KT76C and KT78A tray. This significantly reduces both installation time and cost. It provides pilots with class leading Mode S technology that is also 1090ES ADS-B Out capable too.

Our latest upgrade includes TIS traffic enhancements and enables ADS-B Out to be configured using the existing tray. The TT31 is compatible with many popular GPS position sources including Garmin GNS and GTN navigators and the Trig TN70. This makes installation flexibility the best in class.

PRODUCT FEATURES

  • Improved retrofit performance – ‘plug and play’ Mode S installation for KT76A, KT76C and KT78A
  • Certified Mode S and 1090ES ADS-B Out capable
  • Certified for IFR / VFR flight
  • Amongst the lowest power consumption in class
  • 240 watts nominal output
  • TIS traffic capabilities – portable and/or panel mounted avionics
  • Backlit LED display
  • No cavity tube – no warm up time required (no need for dropper resistors)
  • EASA ETSO and FAA TSO Certification – TSO C166b the latest ADS-B standard
  • Free European Minor Change approvals
  • Free FAA ADS-B STC for 650 aircraft types
  • Software provides the widest compatibility with third party avionics
  • Unbeatable value and quality – designed and manufactured in the U.K.
  • Two year worldwide warranty

PRODUCT DESCRIPTION

The TT31 is a highly efficient class leading transponder. It’s easy to use and operate, with a clear bright display and simple user interface. Features include a flight timer, stop watch and altitude monitor (can alert you of a deviation from your selected altitude). The TT31 includes data link support for the U.S. TIS traffic service, uplinked from approach radars. TIS traffic can be displayed on a variety of portable and panel mount displays, coverage includes most US terminal areas.

Mode A and C transponders are now being replaced by Mode S transponders, this technology is optimised for tomorrow’s airspace requirements. The introduction of ADS-B surveillance technology means the modern transponder has now become the hub of future airspace compliance requirements. Here the TT31 remains the transponder of choice, it was the world’s first transponder certified to TSO C166b. This is latest FAA standard for the U.S. 2020 ADS-B mandate and demonstrates Trig’s advanced levels of compliance. It’s worth remembering that to receive all ADS-B In transmissions in the U.S. the FAA requires a functioning certified ADS-B Out device, fitting a Trig TT31 ensures a full ADS-B In picture.

The TT31 uses half the electrical power of legacy transponders, whilst still transmitting at a higher signal power, its efficient design reduces waste heat in the avionics stack. This reduces the load on the aircraft electrical system improving overall reliability. The flexible power input means that both 14 and 28 volt systems can be used without special configuration or dropper resistors (we recommend that any dropper resistor fitted for a previous transponder should always be removed). The TT31 is compatible with both parallel and serial altitude encoders; it can even act as a serial altitude repeater to provide a convenient altitude source for your GPS.

CHF 2 800.00

  • verfügbar
  • auf Bestellung

TT21 - Class 2 – Mode S and 1090ES ADS-B Out transponder

Trig makes the world’s smallest Mode S certified GA transponders. The TT21 Trig compact transponder can fit into to the tightest panel space. This allows other instrumentation or avionics to be accommodated, providing a genuine benefit in any installation.

 

PRODUCT FEATURES

The TT21 is a class 2 transponder and our most popular compact transponder model, with the following features:

  • Takes minimal panel space, fits in a standard 57mm round instrument hole or smaller compact mount
  • Comes with integrated altitude encoder
  • Certified for IFR / VFR flight
  • Certified class 2 transponder 130 watts nominal output
  • Manual dimming feature (adjustable backlight)
  • Low weight – 440g (0.8 lbs)
  • Low power consumption
  • 1090ES ADS-B Out capable
  • Free European Minor Change approvals
  • EASA ETSO and FAA TSO Certification – includes TSO C166b the latest ADS-B standard
  • Unbeatable value and quality – designed and manufactured in the U.K.
  • Two year worldwide warranty

PRODUCT DESCRIPTION

The TT21 is a two part transponder with a compact control head; this includes an inbuilt altitude encoder – saving further space and expense. A separate hardware box can be installed anywhere in the airframe. The mounted control head is only 54mm (2 3/25”) deep and can be fitted in panel using a 57mm (2 ¼”) round hole or smaller compact mount – the unit ships with the necessary fittings for both install options. The TT21 unit is highly efficient, ideally suited for use via an auxiliary battery in either gliders, balloons or foot launched flight.

Trig’s TT21 has a 130 watts nominal power output, making it a class 2 transponder that meets  international standards for 1090ES ADS-B Out (TSO C166b). The TT21 is ideal for use in flight where a light weight Mode S solution is required and is suitable for both IFR and VFR use.

Older mode A and C transponders are now being replaced by Mode S technology which is optimised for tomorrow’s airspace requirements. The TT21 transponder is easy to operate and with a crisp, bright display. It is easy to read in all lighting conditions and features manual dimming. The transponder control head is splash proof too so it’s ideal for open cockpit and seaplane operations.

You may wish to consider our TN70 product line, this contains all the main components to provide an ADS-B Out solution in one box and can be specified with a TT21. Customers in the U.S. should be aware that FAA, Federal Aviation Regulations (FAR) 91.227 requires that a compliant ADS-B Out solution uses a Class 1 transponder. The TT22 is a Class 1 device and meets this requirement. The TT21 is a Class 2 device and does not meet this regulation.

CHF 2 320.00

  • verfügbar
  • auf Bestellung

TT22 - Class 1 – Mode S and 1090ES ADS-B Out transponder

Trig makes the world’s smallest and lightest Mode S certified GA transponders. The TT22 Trig compact transponder can fit into to the tightest panel space. This allows other instrumentation or avionics to be accommodated, providing a genuine benefit in any installation.

The TT22 is a high powered performer, a Class 1 transponder – ideal for use in aircraft flying above 15,000 feet and / or above 175 knots. It is also suitable for ADS-B, where a Class 1 transponder is required (within the U.S. for example). A free FAA STC allows the TT22 to be installed as a compliant ADS-B Out solution in 576 aircraft types. The TT22 is compatible with many popular GPS position sources including Garmin GNS and GTN navigators and the Trig TN70 – for further information see our U.S. ADS-B page.

PRODUCT FEATURES

  • Compact size – takes minimal panel space, fits in a standard 57mm instrument hole
  • Integrated altitude encoder
  • Certified for IFR / VFR flight
  • Certified class 1 transponder 250 watts nominal output
  • Manual dimming feature (adjustable backlight)
  • Low weight – 440g (0.8 lbs)
  • Low power consumption
  • 1090ES ADS-B Out capable
  • EASA ETSO and FAA TSO Certification – includes TSO C166b the latest ADS-B standard
  • Free European Minor Change approvals
  • Free FAA ADS-B STC for 576 aircraft types
  • Unbeatable value and quality – designed and manufactured in the U.K.
  • Two year worldwide warranty

PRODUCT DESCRIPTION

The TT22 is a two part transponder with a compact control head; this includes an inbuilt altitude encoder – saving further space and expense. A separate hardware box can be installed anywhere in the airframe. The mounted control head is only 54mm (2 3/25”) deep and can be fitted in panel using a 57mm (2 ¼”) round hole or smaller compact mount, the unit ships with the necessary fittings for both install options. The TT22 unit is highly efficient and is ideal for use via an auxiliary battery in gliding or lighter than air flight.

The TT22 transponder is easy to operate and with a crisp, bright display. It is easy to read in all lighting conditions and features manual dimming. The higher powered TT22 can be used in IFR and VFR flight in high performance aircraft, over 175 knots and/or above 15,000 feet. The transponder control head is splash proof too so it’s ideal for open cockpit and seaplane operations.

Mode A and C transponders are now being replaced by Mode S technology which is optimised for tomorrow’s airspace requirements. Despite its modest size the TT22 is a heavyweight performer, at 250 watts nominal power output this class 1 transponder meets the latest FAA TSO C166b standards for ADS-B Out.

Trig were the first company in the world to offer a ‘mandate ready’ certified 1090ES ADS-B Out compliant solution. The TT22 is popular in the U.S. where a certified WAAS GPS, and a ground air determination device are also required forming the ideal 2020 ADS-B solution. It’s worth remembering that to receive all ADS-B In transmissions in the U.S. the FAA requires a functioning certified ADS-B Out device, so don’t miss out on airspace information – fit a Trig TT22.

CHF 2 590.00

  • verfügbar
  • auf Bestellung